CASTING FINISH OPTIONS |
Standard Investment Cast Finish, Electropolished, Polished/Buffed/Passivated. |
| RELEASE FORCE |
Adjustable: 58 - 285 lbs. (126.3 -129.3 kg) |
| HANDLE OPTIONS |
Available for right-hand or left-hand side of body. Please specify #94-RH or #94-LH. |
| WEIGHT |
#94P Body only 3.73 lb. (1.69 kg)
#94H Body and handle only 4.86 lb. (2.21 kg)
#943RS Strike only .68 lb. (.31 kg)
#943-5 mm Strike Shim .28 lb. (.13 kg)
#943-10 mm Strike Shim .56 lb. (.26 kg)
#943-15 mm Strike Shim .84 lb. (.39 kg)
#943-20 mm Strike Shim 1.12 lb. (.52 kg) |
| DIMENSIONS |
Length: 8.39 in. (213 mm)
Height: 2.50 in. (63.5 mm)
#94P Body & Strike
Length: 9.53 in. (242 mm)
Height: 3.50 in. (89.0 mm)
#94LH Body, Handle & Strike (Left)
Length: 9.53 in. (242 mm)
Height: 3.50 in. (89.0 mm)
#94RH Body, Handle & Strike (Right)
Length: 7.36 in. (187 mm)
Height: 2.50 in. (63.5 mm)
#94P Body onl
Length: 8.50 in. (216 mm)
Height: 2.50 in. (89.0 mm)
#94L Body & Handle only (Left)
Length: 8.50 in. (216 mm)
Height: 2.50 in. (89.0 mm)
#94R Body & Handle only (Right)
Length: 1.65 in. (42 mm)
Height: 2.05 in. (52.0 mm)
#943RS Strike only
#943TS Strike only
Length: 1.65 in. (42 mm)
Height: 0.197 in. (5 mm)
#943-5 mm Strike Shim
Length: 1.65 in. (42 mm)
Height: 0.394 in. (10 mm)
#943-10 mm Strike Shim
Length: 1.65 in. (42 mm)
Height: 0.591 in. (15 mm)
#943-15 mm Strike Shim
Length: 1.65 in. (42 mm)
Height: 0.758 in. (20 mm)
#943-20 mm Strike Shim
Width in all cases: 3.86 in. (98 mm) |
| HOUSING MATERIALS |
Body, Strike, Handle Shim Castings: CF-8M (316) Stainless Steel. |
| INTERNAL PARTS |
Coil Spring: 301 Stainless Steel. Ballpin: 416 Stainless Steel (Hardened and Passivated). Cam, Nut, Rivets & Washers: 304 Stainless Steel. Roller, Strike Pin, Set Screw, Cross-Pin & Body Pin: 303 Stainless Steel. E-Clips: 15-7 Stainless Steel. Handle Torsion Spring: 302 Stainless Steel Spring Wire. |
| MOUNTING |
Use 3/8" (Grade 8) or 10 mm (Grade 10.9) bolts for mounting. 2 bolts required for strike & shims, and 4 bolts for the latch body. Flat washers & lock washers are recommended. |
| OFFSET MOUNTING |
Positive door offsets of up to 1.739" are easily accommodated with our 90 Series stainless steel shims.
No shim required 0.000 - 0.197 in. (0 - 5 mm) |
|
|
|
| DOOR-DOORJAMB OFFSET |
#943-5 mm 0.197-0.394 in ( 5-10 mm)
#943-10 mm 0.394-0.591 in (10-15 mm)
#943-15 mm 0.591-0.758 in (15-20 mm)
#943-20 mm 0.758-0.951 in (20-25 mm)
#943-25 mm 0.951-1.148 in (25-30 mm)
#943-30 mm 1.148-1.345 in (30-35 mm)
#943-35 mm 1.345-1.542 in (35-40 mm)
#943-40 mm 1.542-1.739 in (40-45 mm)
Call Brixon for special configurations/materials/finishes. Allow additional time for special plating/finishes/coatings. Specifications subject to change without notice. |
