Brixon Manufacturing
1.800.528.2437
Email Brixon
Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches
Brixon Latches Model 91 Latch
Brixon Latches Model #2 Latch
Brixon Latches Model #3 Latch
Brixon Latches Model 83 Latch
Brixon Latches Model 93 Latch
Brixon Latches Original #4 Latch
Brixon Latches Original 84 Latch
Brixon Latches Original 94 Latch
Brixon Latches Model 4HD & 410 Latch
Brixon Latches Not Sure Which Latch?
Latch manufacturer
handle option
brixon news
Brixon New Brixon News
Brixon News
Model 93 Latches

Model 93 latches are available with high quality, handsomely restyled, stainless steel housings and handles. Stainless steel internal parts are standard. The Model 93 provides the same pressure release range as our original iron latch Model 3.



CASTING FINISH OPTIONS

Standard Investment Cast Finish, Electropolished, Polished/Buffed/Passivated.

RELEASE FORCE Adjustable: 43-180 lbs. (19.5 -81.6 kg)
HANDLE OPTIONS Available for right-hand or left-hand side of body. Please specify #93-RH or #93-LH.
WEIGHT #93P Body only 2.92 lb. (1.32 kg)
#93H Body and handle only 4.05 lb. (1.83 kg)
#943RS Strike only .68 lb. (.31 kg)
#943-5 mm Strike Shim .28 lb. (.13 kg)
#943-10 mm Strike Shim .56 lb. (.26 kg)
#943-15 mm Strike Shim .84 lb. (.39 kg)
#943-20 mm Strike Shim 1.12 lb. (.52 kg)
DIMENSIONS Length: 6.97 in. (177 mm)
Height: 2.50 in. (63.5 mm)

#93P Body & Strike


Length: 9.53 in. (242 mm)
Height: 3.50 in. (89.0 mm)

#93LH Body, Handle & Strike (Left )

Length: 9.53 in. (242 mm)
Height: 3.50 in. (89.0 mm)

#93RH Body, Handle & Strike (Right)

Length: 5.18 in. (131.5 mm)
Height: 2.50 in. (63.5 mm)

#93P Body only

Length: 7.50 in. (190.5 mm)
Height: 3.38 in (85.9 mm)

#93L Body & Handle only (Left)

Length: 7.50 in. (190.5 mm)
Height: 3.38 in (85.9 mm)

#93R Body & Handle only (Right)

Length: 1.65 in. (42 mm)
Height: 2.05 in (52.0 mm)

#943RS Strike only


#943TS Strike only

Length: 1.65 in. (42 mm)
Height: 0.197 in (5 mm)

#943-5 mm Strike Shim


Length: 1.65 in. (42 mm)
Height: 0.394 in (10mm)

#943-10 mm Strike Shim

Length: 1.65 in. (42 mm)
Height: 0.591 in (15 mm)

#943-15 mm Strike Shim

Length: 1.65 in. (42 mm)
Height: 0.758 in (20 mm)

#943-20 mm Strike Shim


Width in all cases: 3.86 in. (98 mm)
HOUSING MATERIALS Body, Strike, Handle Shim Castings: CF-8M (316) Stainless Steel.
INTERNAL PARTS Coil Spring: PH 17-7 Chromium-Nickel Stainless Steel. Ball Pin: 416 Stainless Steel (Hardened and Passivated). Cam, Nut, Rivets & Washers: 304 Stainless Steel. Roller, Strike Pin, Set Screw, Cross-Pin & Body Pin: 303 Stainless Steel. E-Clips: PH 15-7 Stainless Steel. Handle Torsion Spring: 302 Stainless Steel Spring Wire.
MOUNTING Use 3/8" (Grade 8) or 10 mm (Grade 10.9) bolts for mounting. 2 bolts required for strike & shims, and 4 bolts for the latch body. Flat washers & lock washers are recommended.
OFFSET MOUNTING Positive door offsets of up to 1.739" are easily accommodated with our 90 Series stainless steel shims.

No shim required 0.000 -0.197 in (0 - 5 mm)
DOOR-DOORJAMB OFFSET

No shim required 0.000 - 0.197 in. (0 - 5 mm)
#943-5 mm 0.197-0.394 in ( 5-10 mm)
#943-10 mm 0.394-0.591 in (10-15 mm)
#943-15 mm 0.591-0.758 in (15-20 mm)
#943-20 mm 0.758-0.951 in (20-25 mm)
#943-25 mm 0.951-1.148 in (25-30 mm)
#943-30 mm 1.148-1.345 in (30-35 mm)
#943-35 mm 1.345-1.542 in (35-40 mm)
#943-40 mm 1.542-1.739 in (40-45 mm)

Call Brixon for special configurations/materials/finishes. Allow additional time for special plating/finishes/coatings. Specifications subject to change without notice.



3115 Mike Collins Drive • Eagan, MN 55121 • Ph: (800) LATCHES (528-2437) • Ph:(651) 688-2540 • Fax:(651) 688-6234 • Email: info@brixon.com

Site Map | Privacy Policy