 |
Download Model Latch 84 PDF |
CASTING FINISH OPTIONS |
Standard painted finish, unpolished chrome plated, polished chrome plated.
|
| RELEASE FORCE |
Adjustable: 58-285 lbs. (19.5 -81.6 kg) |
| HANDLE OPTIONS |
Available for right-hand or left-hand side of body. Please specify #84-RH or #84-LH. |
| WEIGHT |
#84P Body only 3.81 lb. (1.72 kg)
#84H Body and handle only 4.93 lb. (2.24 kg)
#843RS Strike only .71 lb. (.32 kg) |
| DIMENSIONS |
Length: 8.38 in. (213.0 mm)
Height: 2.51 in. (63.8 mm)
#84P Body & Strike
Length: 9.31 in. (236.4 mm)
Height: 3.38 in. (85.9 mm)
#84H Body, Handle & Strike
Length: 6.57 in. (167.0 mm)
Height: 2.51 in. (63.8 mm)
#84P Body only
Length: 7.50 in. (190.5 mm)
Height: 3.38 in (85.9 mm)
#84H Body & Handle only
Length: 1.65 in. (41.9 mm)
Height: 2.00 in (53.0 mm)
#843RS Strike only
Width in all cases: 3.91 in. (99.3 mm)
|
| HOUSING MATERIALS |
Body, Strike, and Handle 1045 Carbon Steel |
| INTERNAL PARTS |
Ballpin, roller, cam, nut and adjusting screw are case-hardened steel. Strike pin is 303 stainless steel. Spring is chrome silicon. Bearing pin is 303 stainless steel. |
| INTERNAL OPTIONS |
Internal parts may be ordered in stainless steel at extra cost. |
| MOUNTING |
Use 3/8" (Grade 8) or 10 mm (Grade 10.9) bolts for mounting. 2 bolts required for strike & shims, and 4 bolts for the latch body. Flat washers & lock washers are recommended. |
| OFFSET MOUNTING |
Positive door offsets of up to 1.739" are easily accommodated with our 90 Series stainless steel shims. |
|
|
|
| DOOR-DOORJAMB OFFSET |
No shim required 0.000 - 0.197 in. (0 - 5 mm)
Call Brixon for special configurations/materials/finishes. Allow additional time for special plating/finishes/coatings. Specifications subject to change without notice.
|
