Brixon Manufacturing
1.800.528.2437
Email Brixon
Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches Brixon Safety Latches
Brixon Latches Model 91 Latch
Brixon Latches Model #2 Latch
Brixon Latches Model #3 Latch
Brixon Latches Model 83 Latch
Brixon Latches Model 93 Latch
Brixon Latches Original #4 Latch
Brixon Latches Original 84 Latch
Brixon Latches Original 94 Latch
Brixon Latches Model 4HD & 410 Latch
Brixon Latches Not Sure Which Latch?
Latch manufacturer
handle option
brixon news
Brixon New Brixon News
Brixon News
Model 83 Latches

Model 83 latches are made of investment cast steel. The Model 83 replaces & provides the same pressure release range as our original iron latch Model 3.


CASTING FINISH OPTIONS

Standard painted finish, unpolished chrome plated, polished chrome plated, ecoat.

RELEASE FORCE Adjustable: 43-180 lbs. (19.5 -81.6 kg)
HANDLE OPTIONS Available for right-hand or left-hand side of body. Please specify #83-RH or #83-LH.
WEIGHT #83P Body only 3.08 lb. (1.39 kg)
#83H Body and handle only 4.11 lb. (1.86 kg)
#843RS Strike only .71 lb. (.32 kg)
DIMENSIONS Length: 6.99 in. (177.5 mm)
Height: 2.51 in. (63.8 mm)

#83P Body & Strike


Length: 9.31 in. (236.4 mm)
Height: 3.38 in. (85.9 mm)

#83H Body, Handle & Strike

Length: 5.18 in. (131.5 mm)
Height: 2.51 in. (63.8 mm)

#83P Body only

Length: 7.50 in. (190.5 mm)
Height: 3.38 in (85.9 mm)

#83H Body & Handle only

Length: 1.65 in. (41.9 mm)
Height: 2.00 in (53.0 mm)

#843RS Strike only

Width in all cases: 3.91 in. (99.3 mm)
HOUSING MATERIALS Body, Strike, and Handle 1045 Carbon Steel
INTERNAL PARTS Ballpin & strike pin mild steel. Roller, cam, nut & adjusting screw are case-hardened steel. Spring is chrome silicon. Bearing pin is 303 stainless steel.
INTERNAL OPTIONS Internal parts may be ordered in stainless steel at extra cost.
MOUNTING Use 3/8" (Grade 8) or 10 mm (Grade 10.9) bolts for mounting. 2 bolts required for strike & shims, and 4 bolts for the latch body. Flat washers & lock washers are recommended.
OFFSET MOUNTING Positive door offsets of up to 1.739" are easily accommodated with our 90 Series stainless steel shims.
DOOR-DOORJAMB OFFSET

No shim required 0.000 - 0.197 in. (0 - 5 mm)


Call Brixon for special configurations/materials/finishes. Allow additional time for special plating/finishes/coatings. Specifications subject to change without notice.


3115 Mike Collins Drive • Eagan, MN 55121 • Ph: (800) LATCHES (528-2437) • Ph: (651) 688-2540 • Fax: (651) 688-6234 • Email: info@brixon.com

Site Map | Privacy Policy